Selected work
Three pieces of Premier Surface Protection work, shown as they were photographed on site, alongside the method behind them. Where a photograph shows a setting rather than our installation, it is captioned as illustrative.
Clear film worked across a black gloss topside with slip solution, squeegeed out from the centre so the panel finishes flat and edge-free against the teak. Dark gloss is the least forgiving surface for film: every trapped particle and stretched edge shows.
A full-slab island filmed in one piece. The film is floated onto the wet slab, aligned to the slab edge, then worked out to the perimeter and trimmed along the profile so the arris stays crisp and the veining reads exactly as it did before.
XPEL Ultimate Plus resists staining and etching from wine, citrus and cleaning products, is anti-microbial, and enhances the finish of the stone underneath.
Clear protection film is positioned over the stone, worked flat without disturbing the surface character, then finished precisely at the profile. These photographs document the installation and completed surface from the same Premier project.
A curved bar top in a private residence, filmed in place under chandelier light. Curved runs are the hardest stone work to film: the material has to be relaxed into the sweep without stretch marks, and the trim has to follow a radius by eye.
Premier Surface Protection applying protective film to a curved stone bar top.
Method
Two yachts of the same length can need very different film packages, and two apartments on the same floor can need different window film. Finish condition, exposure, access, glazing type and how the space is used all change the answer. That is why we assess first and quote second, and why we do not publish package pricing.
A conversation about the vessel or property, what is bothering you, and what the surface needs to survive. Appointment only, by phone or on site.
We inspect the actual surfaces — finish condition, glazing type, edges, access, and anything that will complicate installation.
Each area named, film specified, sequence and schedule set out, and the applicable warranty stated in writing. Our marine surface protection carries a three-year warranty.
Decontamination and cleaning first; then film cut and fitted panel by panel or pane by pane, with the surrounding area protected.
A walkthrough of the finished work with you, your captain or your facilities team, plus written care guidance for the film installed.
Standards
Private assessment
We look at the vessel, the glass or the stone before we discuss scope. Call the studio or send project details and we will arrange an appointment in Miami-Dade, Broward or Palm Beach County.
